Cute Car Roof Anti Collision Strip Car

Car​ ​Anti-collision​ ​Strip

Material:​ ​Plastic,​ ​rubber
Size:​ ​20*4CM
Pack:1pc

Use​ ​for:​ ​most​ ​clean,​ ​smooth​ ​surfaces.​ ​Widely​ ​used​ ​in​ ​cars,​ ​car​ ​window,​ ​laptop,​ ​computer,​ ​truck,​ ​mirror,​ ​motorcycles,​ ​electric​ ​vehicles,​ ​mobile​ ​phone​ ​cases​ ​and​ ​so​ ​on
Durability:​ ​Waterproof,​ ​long​ ​lasting​ ​color,​ ​resistant​ ​to​ ​natural​ ​high​ ​temperature

❤How​ ​to​ ​use​ ​the​ ​hollowed​ ​stickers:
1.​ ​Cleaning.​ ​Make​ ​sure​ ​that​ ​the​ ​place​ ​where​ ​the​ ​sticker​ ​is​ ​to​ ​be​ ​used​ ​is​ ​free​ ​of​ ​soil,​ ​water​ ​and​ ​wax.​ ​Do​ ​not​ ​clean​ ​with​ ​alcohol.​ ​(please​ ​do​ ​not​ ​touch​ ​the​ ​adhesive​ ​surface​ ​of​ ​the​ ​sticker​ ​with​ ​your​ ​hands​ ​or​ ​other​ ​things)
2.​ ​Remove​ ​the​ ​backing​ ​paper​ ​(the​ ​most​ ​important​ ​step).​ ​Be​ ​sure​ ​to​ ​press​ ​the​ ​white​ ​backing​ ​paper​ ​side​ ​up​ ​to​ ​the​ ​table​ ​top.​ ​Peel​ ​off​ ​the​ ​backing​ ​paper​ ​from​ ​the​ ​corner​ ​of​ ​the​ ​sticker.​ ​When​ ​peeling,​ ​pay​ ​attention​ ​to​ ​the​ ​sticker​ ​that​ ​may​ ​stick​ ​to​ ​the​ ​backing​ ​paper.​ ​Press​ ​it​ ​back​ ​to​ ​the​ ​original​ ​position​ ​on​ ​the​ ​transparent​ ​film​ ​until​ ​all​ ​the​ ​stickers​ ​fall​ ​on​ ​the​ ​transparent​ ​film.
3.​ ​Paste.​ ​Stick​ ​the​ ​transparent​ ​film​ ​together​ ​with​ ​the​ ​sticker​ ​from​ ​one​ ​end,​ ​press​ ​the​ ​transparent​ ​film​ ​while​ ​sticking​ ​to​ ​drive​ ​out​ ​the​ ​air​ ​until​ ​it​ ​is​ ​flat​ ​and​ ​solid.
4.​ ​Remove​ ​the​ ​transparent​ ​film.​ ​Slowly​ ​peel​ ​off​ ​the​ ​transparent​ ​film​ ​from​ ​one​ ​corner.​ ​When​ ​peeling​ ​off,​ ​pay​ ​attention​ ​to​ ​the​ ​sticker​ ​that​ ​may​ ​stick​ ​to​ ​the​ ​transparent​ ​film,​ ​press​ ​it​ ​back​ ​to​ ​the​ ​original​ ​position​ ​to​ ​the​ ​part​ ​to​ ​be​ ​pasted​ ​until​ ​all​ ​the​ ​transparent​ ​film​ ​is​ ​removed.

❤How​ ​to​ ​use​ ​normal​ ​stickers:
The​ ​method​ ​of​ ​sticking​ ​with​ ​water.​ ​Remove​ ​the​ ​backing​ ​paper,​ ​spray​ ​enough​ ​water​ ​on​ ​the​ ​adhesive​ ​surface,​ ​and​ ​paste​ ​it​ ​to​ ​adjust​ ​the​ ​position.​ ​Then​ ​press​ ​out​ ​the​ ​the​ ​water​ ​with​ ​your​ ​hand​ ​or​ ​a​ ​soft​ ​towel.​ ​(Water​ ​is​ ​used​ ​to​ ​avoid​ ​air​ ​bubbles,​ ​if​ ​you​ ​don't​ ​mind,​ ​you​ ​can​ ​paste​ ​directly​ ​without​ ​water.)